Wireless outdoor motion detector with a photo camera to verify alarms
 |
 |
 |
| Detects motion with a range of up to 15 meters for each optical system | Works up to 3 years without battery replacement |
Transmits alarms at a distance of up to 1,700 meters away from the hub
|
Lightning-fast alarms. Verified. ⚡️
MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos. Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary patrol dispatches.
Don't miss a thing ✅
Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night.
- HDR camera
- IR backlight
- Series of 2–5 photos
Intelligent false alarm filter 🔕
MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interferences.
When both sensors detect motion, but the correlational analysis doesn’t identify enough similarities, LISA compares frequency components in the signals of both sensors.
Multilevel anti-sabotage protection 🛡
MotionCam Outdoor can not be unnoticeably disabled even if the system is disarmed. The detector is equipped with masking sensors reacting to hindering, covering and painting the lens.
It will take the hub less than a minute to detect the loss of communication with the detector and inform a central monitoring station and users about the problem. The fact that MotionCam Outdoor was dismantled will become known instantly.- Anti-masking system
- Notifications about detachment
- Configurable detector ping interval
Effective security in any weather ⛈
MotionCam Outdoor resists the heat up to +60°С and withstand the cold down to −25°С. And to protect the sensors of the anti-masking system from rain and snow, we included a special hood.
-
Efficiency in heat and cold
-
IP55 enclosure protection
-
Bundled hood to protect from rain and snow
Uncompromising communication reliability 📶
MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweller and Wings. Radio protocols work independently of each other and each is focused on its own function. Jeweller transmits alarms in 0.15 seconds, and thanks to Wings, the first shot from the site will be in the app in less than 9 seconds.
The radio signal range is sufficient to install the detector where it will be most effective. And up to 3 years of battery life minimizes maintenance efforts.
- Two-way communication at a distance of up to 1,700 meters
- Photo delivery in less than 9 seconds
- Up to 3 years of battery life.
Less manual labor. More settings in the app. 📱
The process of connecting and configuring MotionCam Outdoor saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time,test detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without visiting the site.
Ready to operate straight out the box ✅
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Technical Specifications 🤓
| Classification | Radio-interlinked photoelectric security detector |
| Installation method | Outdoors and indoors |
| Type of detector | Wireless |
| Compatibility |
Hub 2, Hub 2 Plus, Hub Hybrid, ReX 2 Doesn’t work with ReX range extenders |
| Sensing element | Two IR sensors |
| Sensitivity | Adjustable, 3 levels |
| Motion detection distance |
3 to 15 meters when installed at 0.8–1.3 meters (set by user) 1 to 13 meters when installed at 0.5 meters (set by user) |
| Horizontal viewing angle of the detector | 90° |
| Motion detection speed | From 0.3 to 2.0 m/s |
| Pet immunity option |
Yes. When installed at 0.8–1.3 meters and set up correctly, the detector ignores animals up to 80 centimetres tall |
| Camera angle |
|
| TV distortion (EBU standard) | Barrel — 77% |
| Sending photo in case of alarm or on demand | Photo resolution:
Shooting series of up to 5 photos |
| Infrared backlight for shooting in the dark | Yes |
| Protection against false triggering | + |
| Tamper protection | + |
| Protection against masking | + |
| Temperature sensor | + |
| CMS compatibility |
Motion alarms are transmitted to CMSs that support SIA (DC-09) and Contact ID protocols |
| Radio communication protocols with Ajax detectors and devices |
Jeweller — for transmitting events and alarms. Wings — for transmitting photos. |
| Radio frequency band | 866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz Depends on the region of sale. |
| Maximum radio signal strength | ≤ 20 mW |
| Radio signal modulation | GFSK |
| TDMA | + |
| Radio signal range |
Up to 1,700 m (without obstacles) |
| Ping interval | From 12 to 300 seconds |
| Power supply | 4 CR123 batteries |
| Power supply voltage | 6 V |
| Battery life |
Up to 3 years (up to 2.5 years with Entry Delay setting enabled) |
| Protection class | IP55 |
| Operating temperature range | From –25°C to +60°C |
| Operating humidity | Up to 95% |
| Dimensions | 206 × 108 × 93 mm |
| Weight | 470 g |
| Service life | 10 years |